Teradek Bolt 6 LT 1500 TX/2RX

The Teradek Bolt 6 LT 1500 kit is a zero-delay wireless video system with one transmitter and two receivers, so a camera feed can go to the director's monitor and a focus puller's monitor at once. It carries HDMI and SDI over a 1500 ft line-of-sight range for features, commercials and any set with a moving camera.

Because the delay from transmitter to receiver is under a millisecond, it is usable for focus pulling and camera operating, not only for watching. The kit is built to be put to work straight away: the transmitter and both receivers come with antennas, power leads, short HDMI and SDI cables, Noga arms and a cold shoe mount for rigging, and a light stand adapter. The system uses 6 GHz channels as well as 5 GHz, which gives more room to work around busy 5 GHz locations.

It takes 3G-SDI and HDMI 1.4b inputs, up to 4Kp30 over HDMI and 1080p over SDI, with 256-bit AES encryption. The TX and each RX run from 2-pin Lemo power, and the kit supplies the D-Tap to Lemo cables to run them from camera batteries.