/
Daylight
/
Aputure LS 600D Pro
Aputure LS 600D Pro
£100
/ day ex VAT
Output | 600 W; 98,500 lux @ 1 m |
Colour temperature | 5600 K ± 200 K |
CRI / TLCI | CRI ≥96 / TLCI ≥96 |
Power options | AC or V-mount/Gold-mount |
Control | DMX, CRMX, Art-Net, Bluetooth |
Weight | 4.64 kg head + 5.8 kg control box |
Technical
In the case
Description
Output
Rated output | 600 W |
Bare bulb | 22,150 lux @ 1 m; 2,600 lux @ 3 m |
With 600 Series Hyper Reflector | 98,500 lux @ 1 m; 8,500 lux @ 3 m |
With F10 Fresnel, flood (45°) | 89,200 lux @ 1 m |
With F10 Fresnel, spot (15°) | 224,200 lux @ 1 m |
Colour
Colour temperature | 5600 K ± 200 K |
CRI | ≥96 |
TLCI | ≥96 |
CQS | ≥94 |
Optics
Mount | Universal Bowens Mount |
F10 Fresnel beam angle | 15° spot – 45° flood |
Power
Power consumption | ≤720 W |
Rated output | ≤600 W |
AC supply | 100–240 V, 50/60 Hz, 8 A |
DC/battery input | 14.4 V–15 A, 26 V–8.5 A or 28.8 V–7.5 A, minimum 180 Wh, active cooling required |
Control
DMX | 5-pin DMX512/RDM |
Wireless DMX | LumenRadio CRMX (≤100 m) |
Networked | Art-Net |
App | Sidus Link (Sidus Mesh) via Bluetooth (≤80 m) |
RF remote | 2.4 GHz (≤100 m), 3 channels, groups A/B/C/D |
Physical
Lamp head weight | 4.64 kg |
Lamp head dimensions (without yoke) | 30.8 × 15.61 × 15.01 cm |
V-mount control box weight | 5.8 kg |
Total weight (with case) | 18.2 kg |
Operating temperature | -20 °C to 45 °C |
Weather rating | Dust and light rain resistant |
Aputure 600D Pro Lamp Head
Aputure 600d Pro Control Box
Aputure COB Protector Cap
Aputure Lightning Clamp
Aputure 55° Hyper-Reflector
Aputure VA-Remote RC1+
Aputure LS 600 Series 5-pin Weatherproof Head Cable (3m)
Aputure Neutrik powerCON 16 Gauge Power Cable
Aputure Clamp Handle Thumb Screw
The Aputure LS 600d Pro is a 600W daylight COB LED that approaches the output of a 1200W HMI while drawing 720W at most. It is weather resistant and flexible on power, so it works as a main source indoors and out.
Because it draws far less than an HMI, you can run more than one from a single household circuit. The multi-voltage battery plates take V-mount and Gold mount batteries at 14.4V, 26V and 28.8V and can recharge them from mains between scenes. The control box also accepts 48V DC over a 3-pin XLR from power stations or block batteries.
Output is 5600K daylight at CRI and TLCI of 96 or better, with 8,500 lux or more at 3 metres through the included Hyper Reflector. Fitted with the F10 Fresnel in a 15 degree spot it reaches 29,300 lux at 3 metres. It is built to withstand light rain and water spray, and the Bowens mount takes the usual softboxes and domes.
Newsletter
